Pennor, Kritor, Skavfärg

Depth marker for professionals. Longlife pen for marking in deep holes. With 2.8 mm thick graphite pin as standard. The tip is 45 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pen. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is easily fed forward with a click feed via the stainless steel tube. Robust sleeve equipped with belt clip for easy storage in trousers or tool pocket. Pencil sharpener in the sleeve positioned for easy access, the sleeve does not need to be removed from the belt or pocket to sharpen the pencil. Supplied as standard with a graphite pencil.
Reserve pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking on wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

Marker pen for marking in narrow and deep holes. Extra long tip (35mm) in stainless steel and with a Ø 1.5 mm so that you can easily get through brackets for e.g. screw holes. Triangular shape means that it does not roll away. Pen body entirely in plastic, which means that it does not conduct electricity. For permanent marking on all dry surfaces/materials. Contains 2.4 ml of ink and writes about 500 meters. The sleeve is equipped with a reinforced belt clip for easy storage in trousers or a tool pocket. The ink can be removed with alcohol or similar, if necessary.

Deep hole marker for marking in deep holes. The tip is so long that you can easily get through brackets for e.g. screw holes. For marking on most surfaces/materials, even dirty and oily surfaces. Some colors can also be wiped off on smooth surfaces with a damp cloth. Strong tip in stainless steel. Sturdy sleeve with sharpener at the tip. The sleeve has a practical clip to be easily attached to the trouser pocket. The pins are easily pushed forward with a push of the thumb.

For permanent marking in hard-to-reach places and in deep holes such as consoles. Stainless steel telescopic tip.

Metal holder for flat soapstone chalk. With a simple thumb grip, the chalk is fed forward. Supplied with 1 soapstone chalk.

Chalk holder for professional use in strong plastic. Round claw, push button in plastic. For crayons with Ø 11-12 mm. Suitable for both hexagonal and round crayons.

Oil-based marking chalk with extremely high pigmentation of the best quality. Break resistant. Very suitable for all types of wood (dry and wet), With paper on to keep fingers clean. Hexagonal shape.

Felt tip pen for marking and texting on most materials. Aluminum pen body. Waterproof, quick drying. Refillable. With rectangular tip, 12x7.5 mm beveled felt tip. Free from xylene.

Marker pen with liquid pigment ink in an impact-resistant aluminum sleeve. Pump valve provides even color flow. Can write on most hard-to-mark surfaces. Attaches to wood, glass, rubber, metal and stone, etc. Weather-resistant, permanent and waterproof paint without Xylene.

Felt-tip pens fitted with an aluminum sleeve. For labeling and texting. Waterproof and quick drying. Sticks to most substrates such as paper, cardboard, glass, porcelain, etc. Free from xylene.
Artline 70. With round, fine tip 1.5 mm.
Artline 90 . With cut tip width 2-5 mm.

Marker pen with hard-wearing and durable tip in acrylic. Ideal for uneven surfaces such as concrete. Stays sharp and doesn't push into the pen under pressure. The cap is easy to take off and put on with one hand. Still works after 72 hours without cork. For use on concrete, wood, metal, plywood and plastic. Can be used on surfaces with oil, liquid or dirt. Dries quickly - reduces smearing on e.g. plastic.

For marking on all surfaces, both dirty, oily, rusty and wet. Weather and light resistant that can withstand temperatures between -20ºC to +70ºC.

Permanent universal markers for plastic, glass, metal, etc. Odorless Cap-off ink without Toluene and Xylene. Dries quickly. The hood has a practical clip. UV resistant.
Round tip width 1.0 mm.

Fiber tip pens with aluminum sleeve. Quick-drying and permanent on most substrates such as metal, paper, cardboard, glass, etc. Waterproof, quick-drying. Does not dry without a hat for several days. Free from Toluene and Xylene. Round tip, width, 1-3 mm.

Fiber tip pens with aluminum sleeve. Quick-drying and permanent on most substrates such as metal, paper, cardboard, glass, etc. Waterproof, quick-drying. Does not dry without a hat for several days. Free from Toluene and Xylene. Cut tip width, 1-5 mm.

Permanent marker with narrow tip 1-2 mm. Very suitable for marking on cardboard, paper, plastic, glass, wood and metal etc. The pen body is made of environmentally friendly pp plastic. The hood has a practical clip that sits well in the pocket. Quick-drying ink that is water-resistant and fade-resistant. Odorless without the addition of Tuluol and Xylol. Cap-off ink, can be left uncapped for 2-3 days without drying.
Schneider is EMAS certified.

Permanent lacquer marker with round tip 1-3 mm. For marking and decorating most materials such as paper, plastic, glass, metal, ceramics, porcelain, rubber and leather etc. Excellent for marking cables as well as dirty and oily plates. Good coverage. Waterproof, has lightfast ink and cannot be wiped off. Very suitable for outdoor use and withstands welding and washing. Heat resistant up to 300ºC. Corrosion resistant. Alcohol-based, free from xylol/toluene. The ink is fed forward by pushing in the tip, which then sucks up the ink. Replaceable tip.
Schneider is EMAS certified.

Spare pin for deep hole markers.
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces, but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

Refill with graphite pencil for marking pen MT800. 2.8x125 mm.
Contains 10 pins.

Spare pin for depth marker.

Lightly sharpened linden pencil, with medium hard lead (HB) for optimal performance on wood, plaster and other soft materials.

Spray pen designed to reach deep. Operated by compressed air and contains 250 spray puffs of removable fluorescent green chalk pigment. Works on all surfaces, even rough ones such as brick, plaster and wood. The special nozzle is designed to push the green pigment through tight holes. Shoots pigment up to 45mm deep.

Grip-friendly ballpoint pen in holster with built-in sharpener. Pin model pen that also works as a carpenter's pen and depth hole marker. Roll stop on both pen and holster. Stays in place even when bending down. Dirt and moisture are led out via a hole in the bottom of the holster. Optimized pin for durability and resistance to moisture. Easy to change pins. Supplied with 1 graphite pin.

For marking on glowing steel materials and other metals. Workpieces stored in the open and reheated can be marked with these chalks. The writing is not obliterated by fire or water. Withstands heat up to 2000°C.

Sharpener for carpentry pencils and marking chalks with Ø 10-17 mm. Suitable for oval, round, rectangular, triangular and hexagonal pencils and crayons.