Roterande filar

Spindelförlängning för snabb och enkel förlängning av slip- och filverktyg, exempelvis roterande fil eller slipstift. Möjliggör arbete på svåråtkomliga ställen. Försedd med spännhylsa för säker fastspänning av slipverktyget.

Deburring in lathes of edges. With special cutting edge for fine surfaces.

Carbide rotary file.
Shape A: Cylindrical without end cutting.
Tearing AL: Aluminum cutting for non-ferrous materials and plastics.

Carbide rotary file.
Shape C: Cylindrical radius shaped.
Teeth AL: Aluminum cutting for non-ferrous materials and plastics.

Sharpening of edges, planing of surfaces. DIN: ZYA.
A: Cylindrical shape
Teeth: F = Fine, M = Medium, C = Coarse.
After shaft diameter in the model designation is indicated type of cut X, D and possible end grade E.
X = X-cut
D = diamond
E = end grade
Rec. speed, for each diameter. (Depending on material and toothing)
3 mm 40000-100000 rpm.
6 mm 25000-70000 rpm.
8 mm 20000-50000 rpm.
10 mm 17000- 40000 rpm.
12 mm 15000-35000 rpm.
16 mm 12000-30000 rpm.

Deburring and shaping. Provides better accessibility through its well-balanced shape.
F: Pointed shape, rounded top.
Grinding: F = Fine, M = Medium, C = Coarse
After the shaft diameter in the model designation, type of cutting X is indicated.
X = X-cut
Rec. speed, for each diameter. (Depending on material and toothing)
3 mm 40000-100000 rpm.
6 mm 25000-70000 rpm.
8 mm 20000-50000 rpm.
10 mm 17000- 40000 rpm.
12 mm 15000-35000 rpm.
16 mm 12000-30000 rpm.

Rotary carbide file with serrations for highly productive use in specific materials. For deburring, machining contours, chamfering and rounding edges, smoothing welds, polishing castings and changing geometries.
Shape RBF: Point shape with rounded top.
Serrations :
ALU: Extremely high removal in aluminium.
STEEL: Extremely high removal in steel and steel castings. Noticeably increased aggressiveness.
INOX: Extremely high stock removal on all austenitic, rust- and acid-resistant steel. High quality surface finish.

Rotary carbide file for universal use. For deburring, processing contours, chamfering and rounding edges, leveling welds, polishing castings and changing geometries. For steel, steel castings, stainless steel, non-ferrous metals and cast iron.
Shape SKM: Conical with flattened tip.
Teeth:
Z3: Roughing, good surface finish.
Z3 Plus: Roughing, universal use.
Z4: Roughing, blunt chips, good on stainless.
Z5: Fine removal of cast iron, steel < 60 HRC, stainless steel (INOX) and heat-resistant materials such as nickel- and cobalt-based alloys.

(HTML text not available)

Rotary carbide file for universal use. For deburring, processing contours, chamfering and rounding edges, leveling welds, polishing castings and changing geometries. For steel, steel castings, stainless steel, non-ferrous metals and cast iron.
Shape ZYA: Cylindrical shape.
Teeth:
Z3 Plus: Roughing, universal use.
Z4: Roughing, blunt chips, good on stainless.

(HTML text not available)

Rotary carbide file with serrations for highly productive use in specific materials. For deburring, processing contours, chamfering and rounding edges, smoothing welds, polishing castings and changing geometries.
Shape ZYAS: Cylindrical shape, with end cutter.
Serrations:
ALU: Extremely high stock removal in aluminum.
STEEL: Extremely high stock removal in steel and steel castings. Noticeably increased aggressiveness.

Rotary carbide file for cutting steel, stainless steel, metal, cast iron and several other materials.
Shape 52FLH: Flame shaped.
Tear MX: Diamond tooth with chip breaker, high chipping performance, short chips, no clogging.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< BR>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

Rotary carbide file for cutting steel, stainless steel, metal, cast iron, aluminum and several other materials.
Shape 52KEL: Conical with round top.
Tearing MX: Diamond serration with chip breaker, high chipping performance, short chips, no clogging.
Serration ALU: Aluminum serration, no clogging for materials that are difficult to chip such as non-ferrous metals and plastics.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< br>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

Rotary carbide file for cutting steel, stainless steel, metal, cast iron and several other materials.
Shape 52KUD: Ball-shaped.
Tearing MX: Diamond toothing with chip breaker, high chipping performance, short chips, no clogging.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< br>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

Rotary carbide file for cutting steel, stainless steel, metal, cast iron, aluminum and several other materials.
Shape 52RBF: Arc-shaped with rounded top.
Tearing MX: Diamond serration with chip breaker, high chipping performance, short chips, no clogging.
Serration MXX: Fine diamond serration, best suited for stainless steel.
Serration ALU: Aluminum serration , no clogging for materials that are difficult to chip such as non-ferrous metals and plastics.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< br>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

Rotary carbide file for cutting steel, stainless steel, metal, cast iron and several other materials.
Shape 52SPG: Arc-shaped with pointed top.
Teeth MX: Diamond tooth with chip breaker, high chipping performance, short chips, no clogging.
Teeth MXX: Fine diamond toothing, best suited for stainless steel.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< br>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

Rotary carbide files intended for cutting steel, stainless steel, metal, cast iron and several other materials.
Shape 52TRE: Oval shape.
Teething MX: Diamond toothing with chip breaker, high chipping performance, short chips, no clogging.
Teething D-MAX: Strong, less aggressive teething, gives less impact and longer life.
Rec. speed, for each diameter (depending on material and toothing).
3 mm 30000-90000 rpm.
6 mm 15000-65000 rpm.
10 mm 10000-55000 rpm.< BR>12 mm 7000-35000 rpm.
16 mm 6000-25000 rpm.

(HTML text not available)

(HTML text not available)

(HTML text not available)

Rotary high speed steel file (HSS) for deburring, contouring, chamfering/rounding edges, smoothing welds, polishing castings and changing geometries. For steel, steel castings, stainless steel, non-ferrous metals and cast iron. High aggressiveness. The toughness of the high-speed steel provides very high strength. High-speed steel files must be used at low speeds.
Shape A: Cylindrical with end cutting.
Teeth:
ALU: Rough action.
Z1: Rough machining.
Z2: Fine machining, including non-ferrous metals and plastics.
Z3: Fine machining.

Rotary files in batch. Ø 9.6 and shaft diameter 6.0 mm. Carbide.
Contents:
P803: Form B (cylindrical form with end cut).
P805: Form C (cylindrical form with rounded top).
P807: Form D (ball-shaped).
P809: Form E (oval shape).
P813: Form G (point-shaped).

Set of rotary carbide files in 5 parts. Diameter 12 mm, shaft 6 mm and serration X-Trem Cut, for efficient processing in steel, stainless steel, cast iron, bronze, titanium and hard aluminum alloys. Supplied in a protective plastic box.
Contents:
Shape A (cylindrical shape)
Shape C (cylindrical shape with rounded top)
Shape D (ball shaped)
Shape F (point shape with rounded top)
Shape L (long point shape with rounded top)

Set of rotary carbide files in 3 parts. Diameter 12 mm, shaft 6 mm and toothing Allround (cross toothed). High stock removal in cast iron, steel, stainless steel, nickel base and titanium alloys. Supplied in a protective plastic box.
Contents:
ZYAS 1225/6 (cylindrical shape with end cutter)
WRC 1225/6 (cylindrical shape with rounded top)
RBF 1225/ 6 (lace shape with rounded top)

Set of rotary carbide files in 5 parts. Double serration for efficient cutting in steel, stainless steel, metal and cast iron. Supplied in practical plastic box.
Head diameter 12 mm, shaft diameter 6 mm, total length 65 mm.
Type A: Cylindrical shape, flat top, cutting length 25 mm.
Type C: Cylindrical shape, rounded top, cutting length 25 mm.
Type D: Ball shape, cutting length 10 mm.
Type E: Oval shape , cutting length 20 mm.
Type M: Point shape, cutting length 25 mm.